repoze.what releases

This document describes the releases of repoze.what.

repoze.what 1.0.9 (2010-03-04)

• Pin repoze.who to versions <= 1.99 (2.0a1 is incompatible).
• Made tests compatible with released repoze.who 1.0.x.

repoze.what 1.0.8 (2009-03-14)

• Fixed problem with routing_args compliance in repoze.what.predicates.Predicate.parse_variables(); a wrong structure of that variable was assumed.
• Fixed small internal problem with the credentials dictionary.

repoze.what 1.0.7 (2009-03-13)

• Added the is_anonymous predicate.

repoze.what 1.0.6 (2009-03-05)

• The deprecated repoze.what.authorize.check_authorization() didn’t evaluate predicates correctly if predicates were booleanized. Thanks to Michael Brickenstein!

repoze.what 1.0.5 (2009-03-02)

• To ease testing, now repoze.what.middleware.setup_auth() uses repoze.who.plugins.testutil.make_middleware() instead of calling repoze.who.middleware.PluggableAuthenticationMiddleware directly.
• Now non-ASCII messages can be logged without problems in Python < 2.6. Thanks to Christoph Zwerschke (TG Issue #2250).
• Minor updates in the documentation.

repoze.what 1.0.4 (2009-02-06)

• Now request-sensitive predicate checkers are easier to write because of the introduction of the repoze.what.predicates.Predicate.parse_variables() method, which is aware of the wsgiorg.routing_args specification.
• Now repoze.what.predicates.Predicate.unmet() receives an optional argument to override the error message. This feature is backported from v2.
• Backported repoze.what.predicates.Predicate.is_met() from repoze.what v2.
• Improved the predicates section in the manual.
• For forward compatibility with repoze.what v2, the repoze.what.authorize module is deprecated. If you want to use repoze.what v2, you should start using repoze.what.predicates.Predicate.check_authorization() and repoze.what.predicates.NotAuthorizedError instead of repoze.what.authorize.check_authorization() and repoze.what.authorize.NotAuthorizedError, respectively.

repoze.what 1.0.3 (2009-01-28)

This is a bug fix release, there is no new feature implemented.

• For forward compatibility with v2, the latest version of the Ini, SQL and XML group adapters rely on the repoze.what.userid key in the repoze.what credentials dictionary. However, repoze.what was passing the repoze.who identity to them instead of its credentials dict.

repoze.what 1.0.2 (2009-01-23)

For forward compatibility with repoze.what v2.0, predicates should define the evaluate method which deprecates _eval_with_environ as of this release.

This indirectly fixes a thread-safety bug found by Alberto Valverde on Any-based predicates when used along with All-based ones. Thank you very much once again, Alberto!

repoze.what 1.0.1 (2009-01-21)

This release fixes an important bug which may affect production Web sites depending on how you use the All predicate or any of its derivatives (has_all_permissions and in_all_groups). TurboGears 2 applications are all affected, at least by default.

The likelihood that this will affect your application is very high, so upgrading is highly recommended if it’s on production.

• Some repoze.what predicates were not thread-safe when they were instantiated in a module and then shared among threads (as used in TurboGears 2). This was found by and solved with the help of Alberto Valverde (¡Gracias, Alberto!).

  We fixed this by making repoze.what.predicates.Predicate.eval_with_predicate() raise an exception if the predicate is not met, instead of returning a boolean and setting the error instance attribute of the predicate to the predicate failure message.

  So if you are using that method directly, instead of using repoze.what.authorize.check_authorization(), this is a backwards incompatible change for you and thus you should update your code. If you check predicates like this (which is discouraged; see repoze.what.authorize.check_authorization()):

  from repoze.what.predicates import is_user, in_group, All
  
  p = All(is_user('someone'), in_group('some-group'))
  environ = gimme_the_environ()
  
  if p.eval_with_environ(environ):
      print('Authorization is denied: %s' % p.error)
  else:
      print('Authorization is granted')
  

  Then you should update your code like this:

  # This way of checking predicates is DISCOURAGED. Use
  # repoze.what.authorize.check_authorization() instead.
  from repoze.what.predicates import is_user, in_group, All, PredicateError
  
  p = All(is_user('someone'), in_group('some-group'))
  environ = gimme_the_environ()
  
  try:
      p.eval_with_environ(environ)
      print('Authorization is granted')
  except PredicateError, error:
      print('Authorization is denied: %s' % error)
  

  Note

  Because of this, TurboGears 2 users who want to use this release, should try the latest revision in the TG2 Subversion repository or wait for TurboGears-2.0b4. But again, there’s no hurry if your application is not in production.

• For forward compatibility with repoze.what v2, the user id used in the built-in predicates is that found in environ['repoze.what.credentials']['repoze.what.userid'] and the adapters loaded are now available at environ['repoze.what.adapters']. This is not a backwards incompatible change.

repoze.what 1.0 (2009-01-19)

This is the first stable release of repoze.what and it was announced on the Repoze blog.

• Fixed a problem with unicode support in repoze.what.authorize.check_authorization(), reported by Chen Houwu on TurboGears mailing list.
• Added the current user’s groups and permissions to the newly-created environ['repoze.what.credentials'] dictionary for forward compatibility with repoze.what v2. Such values are still defined in the repoze.who identity dictionary, but its use is highly discouraged as of this release. See repoze.what.middleware.
• Applied work-around to fix Python v2.4 and v2.5 support.

repoze.what 1.0rc2 (2008-12-20)

• Fixed the constructor of the Not predicate, which didn’t call its parent and therefore it was not possible to specify a custom message.

• From now on, predicates that are not met will have only one error message, even in compound predicates. It didn’t make sense to have a list of errors and thus this behavior has been changed in this release. This will affect you if you deal with repoze.what.authorize.check_authorization() directly and handled the errors of repoze.what.authorize.NotAuthorizedError as in:

  try:
      check_authorization(predicate, environ)
  except NotAuthorizedError, exc:
      for error in exc.errors:
          print error
  

  The code above may be updated this way:

  try:
      check_authorization(predicate, environ)
  except NotAuthorizedError, exc:
      print exc
  

  Note

  This doesn’t affect TurboGears 2 users because TG itself deals with this function and it’s already updated to work with repoze.what 1.0rc2. Keep in mind that for this release to work on TurboGears 2, you need TurboGears 2 Beta 1 (not yet released as of this writing) or the latest revision in the repository.

• For forward compatibility, it’s no longer mandatory to use the groups/permissions-based authorization pattern in order to use repoze.what. This package should support several authorization patterns and they must all be optional, such as the upcoming support for roles-based authorization in repoze.what 1.5. As a result, now you can skip the definition of group and permission adapters and use repoze.what.middleware.setup_auth() as a simple proxy for repoze.who.middleware.PluggableAuthenticationMiddleware:

  app_with_auth = setup_auth(
      app,
      identifiers=identifiers,
      challengers=challengers,
      mdproviders=mdproviders,
      classifier=classifier,
      challenge_decider=challenge_decider
      )
  

repoze.what 1.0rc1 (2008-12-10)

• Added support for read-only adapters in the testutil with the ReadOnlyGroupsAdapterTester and ReadOnlyPermissionsAdapterTester test cases.
• Fixed Python 3 deprecation warnings.

repoze.what.plugins.ini – Ini adapters available (2008-12-09)

José Dinuncio has made a great work writing group and permission adapters for Ini files! So, thanks to him, now it’s not only possible to store your groups and permissions in databases, but also in files!

• Link: http://github.com/jdinuncio/repoze.what.plugins.ini/

repoze.what 1.0b2 (2008-12-04)

• Added support for read-only sources. See repoze.what.adapters.BaseSourceAdapter.

Backwards-incompatible changes

• The signature of repoze.what.middleware.setup_auth() has changed: Now it simply receives the WSGI application, the group adapters and the permissions adapters – additional keyword arguments will be sent to repoze.who.middleware.PluggableAuthenticationMiddleware. Also, it no longer defines a default identifier or challenger.

  Note

  It’s very unlikely that this affects your application, as that function is normally used by repoze.what.plugins.quickstart.setup_sql_auth().

repoze.what 1.0b1 (2008-11-26)

This is the first release of this package as part of the Repoze project. It started as the repoze.who extension for TurboGears 2 applications (tg.ext.repoze.who, doing authenticatication and authorization) by Chris McDonough, Florent Aide and Christopher Perkins, then Gustavo Narea took over the project to make it deal with authorization only and add support to store groups and permissions in other types of sources (among other things) under the tgext.authorization namespace, but finally it was turned into a Repoze project in order to make it available in arbitrary WSGI applications.

• Removed dependencies on TurboGears and Pylons.

• Introduced a framework-independent function (repoze.what.authorize.check_authorization()) to check authorization based on a predicate and the WSGI environment, along with the repoze.what.authorize.NotAuthorizedError exception.

• Now repoze.what is 100% documented.

• Moved the predicates from repoze.what.authorize to repoze.what.predicates. Nevertheless, they are imported in the former to avoid breaking TurboGears 2 applications created when tg.ext.repoze.who or tgext.authorization existed.

• Added the Not predicate.

• Now you can override the error message of the built-in predicates or set your own message at instantiation time by passing the msg keywork argument to the predicate. Example:

  from repoze.what.predicates import is_user
  
  my_predicate = is_user('carla', msg="Only Carla may come here")
  

  As a result, if your custom predicate defines the constructor method (__init__), then you’re highly encouraged to call its parent with the msg keyword argument. Example:

  from repoze.what.predicates import Predicate
  
  class MyCoolPredicate(Predicate):
      def __init__(self, **kwargs):
          super(MyCoolPredicate, self).__init__(**kwargs)
  

• Moved the SQL plugin (repoze.what.plugins.sql) into a separate package. Also moved repoze.what.plugins.quickstart into that package because it’s specific to the SQL plugin.

• Log messages are no longer sent to standard output if the WHO_LOG environment variable is defined, but with AUTH_LOG.

• Now repoze.what uses logging internally to ease debugging.

Backwards-incompatible changes

• If you have custom predicates, you should update the eval_with_object method, which has been renamed to _eval_with_environ and only receives one argument (the WSGI environment). This is, if your method’s signature looks like this:

  eval_with_object(obj, errors)
  

  Now it should look like this:

  _eval_with_environ(environ)
  

  Note that errors are no longer passed.

  On the other hand, the error_message attribute of predicates has been renamed to message because they are not only used to display errors (see repoze.what.predicates).

• The repoze.what.authorize.require() decorator has been removed because it’s specific to TurboGears. TurboGears 2 applications will find it at tg.require().

Because this is the first beta release, there should not be more backwards incompatible changes in the coming 1.X releases.